- Pure Handmade, point to point hand welding
- Two Japanese high quality EI output transformers with high sound quality
- Use the EI type power transformer designed specially for this machine
- The pre-amp stage uses 2x 12AX7 and 12AU7 vacuum tubes, and the power stage uses 4 EL34 vacuum tubes to be AB1 type push-pull power amplification,
- With Aluminium remote control & Vacuum tube protective cover
two Japanese high quality EI output transformers with high sound quality
Use the EI type power transformer designed specially for this machine
The pre-amp stage uses each 2x 12AX7 and 12AU7 vacuum tubes, and the power stage uses 4 EL34 vacuum tubes to be AB1 type push-pull power amplification, providing triode and super-linear selection function. Triode working, sound soft, pure and smooth, suitable for voice, string; super linear way, open, ebullience, sound momentum is good, suitable for large dynamic scenes, appreciation and other types of music.
There is a driver tubes and power tubes current trimming knob with current display meter.
infrared function remote control. infrared function remote control.
When it is turned on, high voltage delay and mute delay function (about 30 seconds).
Japanese ALPS high grade motor potentiometers
convenient installation plug type vacuum tube cage cover.
15W+15W (RMS triode)
35W+35W (RMS Ultralinear)
Harmonic Distortion: 1% (1kHz)
Frequency Response: 15Hz ~ 35kHz (-1.5dB)
Input sensitivity: 200mV
Input Impedance: 100 kohms
Signal to noise ratio: 88dB
Output Impedance: 4 ohms, 8 ohms, 16 ohms
Vacuum tubes: 12AX7 x 2, 12AU7 x 2, EL34 x 4
Dimension (W x D x H) (370 x 325 x 105) mm
Net weight: 18.5kg
Gross weight: 21kg
Power supply: 110V - 120V 60Hz/50Hz.(For United States)
If you need to use it in Europe, there is a selective switch to set it to be 220V-240V ,It works well in Europe too.
Power consumption for the whole machine: 230W
1 x Finished tube amplifier
1 x Aluminium remote control
1 x Vacuum tube protective cover
1 x English Instruction manual